Diode Dynamics is suspending the sale of LED Headlight bulbs in the United States, due to federal regulations which restrict the use of replaceable light sources in headlamps. This restriction applies to all LED Headlight bulbs on the market. It is not unique to Diode Dynamics.

Halogen light bulbs to be banned from this September – with fluorescent light bulbs to follow suit; shift to LED bulbs will cut 1.26 million tonnes of CO2 – the equivalent of removing over

Yes, although your car may have an old system, you will be able to put LED bulbs in it. Carmakers have made so many improvements with the LED light technology which makes it very easy for car owners to switch from halogen bulbs to LED lights. While it’s possible to put LED bulbs in an old car, there are a couple of important factors you need

Many of our customers love the stylish look and brighter beam that x enon headlight bulbs can produce and want to achieve this using their halogen system. In a nutshell, HID kits are not road legal, because they're classed as an aftermarket modification. Keep on reading to find out everything you need to know, or skip to the bottom of this post

LED MR16 lamps The LED MR16 lamp is a retrofit product, meaning that it is designed to replace a halogen MR16 lamp used in a luminaire such as a downlight using the existing transformer and dimmer (if installed). In changing to an LED MR16, the aim should be to achieve improved safety and performance, re-

Firstly, look at the colour temperature of the bulb. A higher colour temperature indicates that the bulb is more blue in colour, and a lower temperature means the bulb is more yellow. Xenon HID bulbs with a high colour temperature - such as 8000K or above - are sometimes not road legal. Halogen bulbs with a colour temperature of 4300K or over

3. Remove the fitting and locate the transformer in your MR16 circuit. Use a screwdriver to loosen any screws that are holding the fitting into place and carefully remove it. Follow the wires until you find the transformer, which is usually located just above the light fitting. Driving lights and fog light have no aiming requirements for inspection and are not tested as part of the Texas inspetion process. They have no color or disance requirements but cannot be red in color. This makes HID driving and fog light retrofits also completely legal for inspection purpposes.

The answer really depends on what type of tail light bulb you decide to go with. Halogen tail light bulbs will cost about $3-5 each to replace, LED tail light bulbs will cost about $10-15 each to replace. You may want to replace both brake light bulbs if you are replacing one if one bulb just went out the other one may on its way out too.

^{Temperature: 3,000K. The Sylvania H11 XtraVision Halogen Headlight Bulb comes in a pack of two. These H11 bulbs are designed to replace your stock halogen headlights. The H11 bulbs are also halogen bulbs, making them easy to replace and compatible with most vehicles.}

Guys please avoid buying from Autobahn. They don't honour warranty on the products. I bought one set of led bulbs from them in may 2018 with 2 year warranty and both the bulbs have conked off. First they asked me to send the video of the bulbs switched on, which I did in January 2020 and now they are refusing to replace the bulbs.

It's not legal and also not advisable. LED bulbs in a halogen headlight can't focus the light beam properly so you actually wind up with less light on the road where you need it and more light as glare into oncoming traffic. See this post on all the issues with trying to retrofit LED bulbs into halogen lights.

LEDs are expected to last up to 20-25 times longer than a halogen bulb, and most LEDs have a rated life of about 30,000 hours. Due to all the benefits that LED bulbs provide, this is exactly why so many drivers are wanting to put LED bulbs in the car for replacement of halogen bulbs. A lot of new cars are manufactured with built-in LEDs.

Pull the bulb straight out of the socket. Use a rag or glove to protect your hand in case the bulb breaks. To insert a single contact bayonet bulb, place the base of the bulb in the socket. Make sure the index lug on the base is lined up with the slot in the socket. Then, push in slightly and turn clockwise.

^{2. Cover your hands with gloves or a rag so you don’t touch the bulb. Touching a halogen light bulb with your bare hands can ruin the bulb or make it last a shorter period of time due to the oils on your fingers. Put on thin fabric gloves or cover your hand with a cloth so you’re ready to change the bulb. [2]} When fitted by the manufacturer, they’re perfectly legal, and—while they may appear brighter than halogen bulbs—are within legal limits for dazzle. However, there is another type of LED headlights which are illegal for road use in the UK: aftermarket LEDs. These are LED bulbs that are put in after a car has left the factory, and are not .